Theatrical & Set Hardware
Show
per page
Used for lashing flats together
Sharp steel edges are broken to prevent cutting the lashline
Size: 2" X 4 1/2"
Used to receive the brace hook end of the stage brace
Fastens to standard 3" side rails of theatrical flats
Size: 2"X 4 1/2"
Used to receive brace hook end of stage brace
Fastens to side rails smaller than 3"
Size: 2" x 3 1/2"
Used on door or cabinet frames to eliminate the necessity of wood stops and to align two or more flats together
Size: 1"X 2 3/4"
Used for lashing flats together
Often used for tying off near the bottom of the flat
Sharp steel edges are broken to prevent cutting the lashline
Size: 4"X 3/4"
Used for lashing flats together
Can be attached to either the surface or edge of the flat rails
Similar to the round line cleat except it is offset
Size: 4"X 3/8"
Used with picture wire to hang pictures,or paintings over mouldings.
Permanently fastens bolt plate
Designed for use with 3/8" carriage bolt
Size: 2"X 2"
Used for many fastening purposes
Can be mounted or mortised in the stage or platform
Designed for use with a 3/8" - 16 threaded bolt
Size: 3 1/2"X 2"X 1/4"
Made of wrought iron steel
Used on corners of heavy boxes and traveling cases
9 holes for 3 screws on each side
Size: 2 1/2" x 2 1/2" x 2 1/2"
Used to quickly and easily assemble and disassemble a platform
Designed to hold a 1" IPS pipe, which can be adjusted to determine platform height
Size: 3"X 5 1/4"X 8"
Spring load feature allows for up to 1/8" take-up to compensate for set in gasketing, irregularities of sealing surface, and mounting in accuracies
Provides up to 250lbs. preload
Size: 4 1/2" - 4 3/4"
Does not have a spring load feature
Provides up to 250 lbs. preload
Size: 1 3/4"X 3" (closed)
Black Finish
Made of wrought steel
Used as sturdy, comfortable handle for chests and boxes
Screws included with zinc plated but not black finish
Coffin Lock
Used for locking platforms and panels together.