Rope & Rigging Hardware

We stock both types of Steel Batten Clamps.

Used to build quick, rigid structures
Have test load capacity of 8000 pounds

A heavy duty pipe clamp that enables you to attach two pieces of 1 1/4" or 1 1/2" inside diameter pipe No free pipe end needed

Clips cannot be installed incorrectly
Drop forged
Minimum use two for each loop

Inside sleeve splice
Assemble pipe sections to acheive the desired batten length
Standard pipe length - 21 feet long (can be spliced together to make longer battens)
Pipe not included, must drill your own holes

Now a new item to sleeve Schedule 80 pipe.

Manufactured by Modern Studio Eqipment Faster and stronger way to sleeve pipes together
Contains 4 tightening set screws

Used for fastening a threaded rod to the ceiling
Made of mallable iron

Puts steel thread into wood, ideal for use with stove bolts and machine screws
100 per pack

Designed as a removable thread, will not crush wood fiber

Wrought steel rod with a continuous thread

Used to pin scenery down
Can accomodate a 5/8" or 3/4" rope

Made of weldless drop forged steel with a heavy galvanized coating

Eyes are the same size

Jaw end has a removable pin

Can be used for both wire and manila rope

Used where extreme strength and flexibilty is desired
Steel cable is made of 7 strands with 19 wires in each strand
Available in 500' reels only

The unique triangular jaw design of these cutters does not leave a frayed end

Locks and unlocks easily and quickly
Made of galvanized steel

Used to fasten chains onto beam clamps and pipe battens
Made of wrought steel

Clear coated

Used where extreme strength and flexibilty is desired
Steel cable is made of 7 strands with 19 wires in each strand
Available in 500' reels only

Grade 43
Made of open hearth steel
Self-colored is standard, galvanized available as a special order
Safe working load: 2600 lbs.

In most cases this will have to be picked up or sent via truck.