Gels, Gobos, Lighting Fixtures & Hardware

Now you can eliminate hauling ladders about the studio floor in order to make minor adjustments to lights - New York Mutual's Light Adjuster is made of light structural aluminum, yet is sturdy
It telescopes in length from 8' to 15'
When held by a tech

This heavy duty channel stock steel ladder, finished in a heavy duty balck enamel, available in 2-3-4 rung configurations is ideal for mounting most fixtures, including the 1K series from the tormentor position or wherever vertical mounting of multiple objects is needed.

These lighting stands are light weight and very durable - if you have a limited budget, these lighting trees are the perfect solution
Ultimate Support has many lighting tree packages. We only feature the Heavy Duty Package in this catalogue.

Used to mask light leaks and to conceal unsightly cabling. Use it outdoors for weather protection. It is the ideal material for making a snoot to shape a beam of light or barndoors to control spill. In film and video work, shiny surfaces which cause unwanted glare.

You can construct your own lighting tree using the bases listed
You can also construct your own tree using the lightweight Ultimate Support components listed

Three-wire
Gauge: 16-3

Two-Fers and Three-Fers are available with no connector, stage pin grounded(GP) or twistlock grounded (GL)
Rubber cable leads

These small rugged adaptors are of unibody construction and factory wire

Due to the high heat emitted by lighting instruments, special heat resistant leads are used to feed power into the back of the lighting fixture
Prices are per 40" lead with eyelets
Three leads plus a Glass woven sleeve (36" long) equal one instrument

The accessory Strain Relief is suggested for the 20 amp connector when undersized cable is used
It is ideally suited for use with the sleeved leads common to many lighting fixtures
The tough polycarbonate clamping device will accept cable sizes up to

The most secure connection available, but very expensive
Old - nib out configuration
Grounded 3 pole connectors
Amp: 20

3 wire

Volts: 125/250
Amps: 20

The only 15/20 amp connector that locks on ground pin
Ground 3 pole connectors
Volts: 125/250
Amps: 15/20

With these light strings you can duplicate the brilliant effects of the chase strip lighting seen on theatre marquees
Each chaser strand comes with a controller for that strand length and molex connector
If you need longer lengths, contact a sales rep

They may be pipe or tree mounted and are perfect for tight spaces where conventional rackmount dimmer packs are too bulky
With both male and female XLR connectors, the control switch may be daisy-chained from pack to pack
DMX or analog

This clever patented handle will definately make life easier for all
The Handle fits onto the existing bolt found on pipe clamps therefore eliminating the need for a wrench
The Handle can be repositioned easily if you need to use a wrench
And since

This gooseneck lamp is used for turntables, preamps, keyboards, music stands, lecterns, mixers, lightboards, clip boards, and anywhere you need a light light
Both sets include base and dimmer
6 foot cord, wall plug-in transformer, gooseneck.