Rope & Rigging Hardware
Show
per page
Equipped with Timken roller bearing assemblies.
Equally adapted to either T-bar or wire guides.
Upright Series 55M multi-speed systems available as a special order, contact a sales representative for information.
All blocks are made of cast iron.
Used to press on a #H2058 Nicopress Sleeve
Each size cable requires the proper tool size
Made of drop forged steel with a heavy galvanized coating.
We stock the largest selection of turnbuckles anywhere ready for immediate shipment.
Used to fasten the ends of small lines
Adjusts easily with a small screwdriver
Made of galvanized steel
Used in conjunction with wire rope thimbles to fasten cable around battens
Used to form loops or thimble eyes on cables
During destruction tests, the cable failed when the eye and sleeve remained in tact
OSHA approved
Sold 100 per pack
Loose side hook, roller bushed sheaves
Equipped with Timken roller bearings assemblies
Equally adapted to either T-bar or wire guides
Underhung or upright
Series 59M multi-speed systems available as a special order, contact a sales representative for information
All blocks are made of cast iron.
For rope diameter - 5/16"
Made of pressure-molded nylon
10 per package
Bolt Hole Diameter - 1/4"
New Style & Old Style Pulleys
*Use next size up if you are using hemp rope
* Use next size up if you are using hemp rope
